GE电气通用模块IC695CPK330 RX3i CPE330

易卖工控网（www.ymgk.com）提供”GE电气通用模块IC695CPK330 RX3i CPE330”，产品详情：品牌/厂家：GE、型号：IC695CPK330 RX3i CPE330、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

IC695CPK330 RX3i CPE330传感器安装在现场，其电源箱和指示表可安装在操作处或集控室。其它按机电仪表常规要求。并注意如下： 
1、安装前，须先接通电源。校核传感器的就地指示和热膨胀监测保护仪刻度是否吻合，以检查运输过程中有否偏移原来出厂时的调整值。 
2、传感器可任意位置安装，但不能与强磁场或强电流导线接近。  
张力测量仪表分为IP20和IP65两种防护等级，
根据安装环境进行选型，型号有：PFEL111，PFEL112，PFEL113. 
PFEL111:无DP接口，能连接2个压头 
PFEL112：带DP接口，能连接2个压头 
PFEL113：带DP接口，能连接4个压头
 

ABB张力测量系统常用型号型号有：
PFTL101A、PFTL101AE、PFTL101AER、PFTL101B、PFTL201、PFTL301E、PFCL201C/CD 、PFCL201CE、PFEL111、PFEL112、PFEL113、PFEA111、 PFCL201C、PFTL101B、PFTL101BE、PFTL101BER、PFTL201C、PFCL301E、PFTL301E、PFRL101D、PFRL101C、PFRL101B、PFRL101A、PFEA113、PFEA112、PFEA111、PFTL201CE、PFTL201D、PFTL201DE、PFVL141V、PFVL141C、PFVL141R、PXAH401、PFVA401、PFBL141B/C、PXUB201、PFEA101， PFVL142V、PFVL142C、PFVL142R。
 

ABB张力测量系统常用产品：
3BSE030369R0065 PFEA:112  控制单元
PFVI-401  压头励磁单元
MC-400R（PFXA-401） 压头控制单元
PFVK128  继电器板
PF113A  继电器底座
PFVK134  输入模组
PFCL 201C  张力计
PFVK135  输出模组
PFCL201C-10KN张力计 张力计
PFVL 141C-5MN 不锈钢压头
PFCL201CE-50KN  压头
PFVL 141V-20MN 粗轧机压头
PFEA111  张力控制单元
PFVL 141V-22MN 精轧机压头
PFEA112-65;3BSE030369R65  张力计电源
PFVL141V-35MN 压头
PFSA140  sn：3BSE006503R1  电器件
PFVO 142 25A  匹配单元
PFTL 101A 2000 N MAX.MESSKRAFT  传感器
PFXA401SF含插头 SN.8694397  张力计
PFTL 201C  张力计

PXAH 401  操作单元
PFTL201C-10KN  张力计
PFCL.201C-50kN  张力计压头
PFTL201D-50KN  张力计
PFTL.201C-10kN  张力计压头
PFV1141V-5MN  测压仪压头
PFTL.201C-20kN 张力计压头
PFVA 401F  控制单元
DE41FT1FPF1CSASAA2E011 张力计压头
PFVI131  电源模组
ABB压头，ABB张力传感器，ABB张力计，ABB测压元件
诺希德优价经销ABB压头，ABB张力传感器，ABB张力计，ABB测压元件， ABB LOAD CELL。具体型号，详细资料。咨询！：（总机） （自动）：www.rosit.com张力控制器PFTL各系列枕块式PFTL 201C-10.0 PFTL 201CE-10.0 PFTL 201C-20.0 PFTL 201CE-20.0 PFTL 201C-50.0枕块式张力计应用描述：常规控制单元，能接2个压头，根据应用环境的不同，有IP20和IP65的防护等级，PLC接口信号为0--10V DC ， 各种校准和量程参数可以现场设定。

型号：PFCL201C

　　描述：枕块式张力计垂直测压元件,采用圆柱形插头连接；测力范围：5~50KN;

型号：PFCL201CD/CE

　　描述：枕块式张力计垂直测压元件,采用电缆密封接头/带保护软管的固定电缆连接,测力范围：5~50KN;

型号：PFTL101A

　　描述：枕块式张力计水平测压元件,圆柱插头连接,测力范围：0.2~2KN.

型号：PFTL101AE

　　描述：枕块式张力计水平测压元件,固定电缆连接,测力范围：0.2~2KN.

型号：PFTL101AER

　　描述：耐酸型枕块式张力计水平测压元件,固定电缆连接,测力范围：0.2~2KN. 用于造纸湿端张力测量，防护等级可达IP66/67

型号：PFTL101B

　　描述：枕块式张力计水平测压元件,圆柱插头连接,测力范围：2~20KN.

型号：PFTL101BE

　　描述：枕块式张力计水平测压元件,固定电缆连接,测力范围：2~20KN.

型号：PFTL101BER

　　描述：耐酸型枕块式张力计水平测压元件,固定电缆连接,测力范围：2~20KN. 用于造纸湿端张力测量，防护等级可达IP66/67型号：PFTL201C

　　描述：枕块式张力计水平测压元件,圆柱插头连接,测力范围：10~50KN.

型号：PFCL301E

　　描述：迷你型纸幅张力垂直测压元件,测压范围:0.2~1KN型号：PFTL301E

　　描述：迷你型纸幅张力水平测压元件,测压范围:0.1~1KN

型号：PFRL101D

　　描述：径向测压元件,额定负载5.0KN.型号：PFRL101C

　　描述：径向测压元件,额定负载0.5~2.0KN.

15、型号：PFRL101B

　　描述：径向测压元件,额定负载1.0KN.

PFTL 201C-10.0

PFTL 201CE-10.0

PFTL 201C-20.0

PFTL 201CE-20.0

PFTL 201C-50.0

PFTL 201CE-50.0

PFTL 201D-50.0

PFTL 201DE-50.0

PFTL 201D-100.0

PFTL 201DE-100.0

PFCL 201C-5.0

PFCL 201CD-5.0

PFCL 201CE-5.0

PFCL 201C-10.0

PFCL 201CD-10.0

PFCL 201CE-10.0

PFCL 201C-20.0

PFCL 201CD-20.0

PFCL 201CE-20.0

PFCL 201C-50.0

PFCL 201CD-50.0

ABB indenter, ABB tension sensor, ABB tensiometer, ABB load cell, ABB force measurement, ABB tension measuring system, ABB tension measuring instrument, ABB LOAD CELL, with stable performance and reliable quality, are widely used in paper-making, metallurgy and other occasions requiring high-precision tension control, and can be accurately selected according to different measurement range, installation form and application occasions.

The specific specifications are selected according to the physical quantities measured on site. The tension measuring instruments are divided into two protection grades, IP20 and IP65,

According to the installation environment, the models are PFEL111, PFEL112, PFEL113

PFEL111: Without DP interface, 2 indenters can be connected

PFEL112: with DP interface, capable of connecting two indenters

PFEL113: With DP interface, it can connect 4 pressure heads



Common models of ABB tension measuring system are:

PFTL101A、PFTL101AE、PFTL101AER、PFTL101B、PFTL201、PFTL301E、PFCL201C/CD 、PFCL201CE、PFEL111、PFEL112、PFEL113、PFEA111、 PFCL201C、PFTL101B、PFTL101BE、PFTL101BER、PFTL201C、PFCL301E、PFTL301E、PFRL101D、PFRL101C、PFRL101B、PFRL101A、PFEA113、PFEA112、PFEA111、PFTL201CE、PFTL201D、PFTL201DE、PFVL141V、PFVL141C、PFVL141R、PXAH401、PFVA401、PFBL141B/C、PXUB201、 PFEA101， PFVL142V、PFVL142C、PFVL142R。



Common products of ABB tension measuring system:

3BSE030369R0065 PFEA: 112 control unit

PFVI-401 head excitation unit

MC-400R (PFXA-401) head control unit

PFVK128 relay board

PF113A relay base

PFVK134 input module

PFCL 201C Tensiometer

PFVK135 output module

PFCL201C-10KN Tensiometer Tensiometer

PFVL 141C-5MN stainless steel indenter

PFCL201CE-50KN head

PFVL 141V-20MN Roughing Mill Indenter

PFEA111 tension control unit

PFVL 141V-22MN finishing mill ram

PFEA112-65; 3BSE030369R65 tensiometer power supply

PFVL141V-35MN head

PFSA140 sn: 3BSE006503R1 electrical parts

PFVO 142 25A matching unit

PFTL 101A 2000 N MAX.MESSKRAFT sensor

PFXA401SF with plug SN 8694397 Tensiometer

PFTL 201C Tensiometer

PXAH 401 operation unit

PFTL201C-10KN tensiometer

PFCL. 201C-50kN tensiometer head

PFTL201D-50KN tensiometer

PFTL. 201C-10kN tensiometer head

PFV1141V-5MN pressure gauge head

PFTL. 201C-20kN tensiometer head

PFVA 401F control unit

DE41FT1FPF1CSASAA2E011 Tensiometer head

PFVI131 power module

ABB pressure head, ABB tension sensor, ABB tensiometer, ABB load cell

Nordisk sells ABB pressure head, ABB tension sensor, ABB tensiometer, ABB load cell and ABB LOAD CELL at a preferential price. Specific model and details. consultation!: (switchboard) (auto
产品说明:

用于0.12-2.2KW鼠笼式电机的速度和转矩控制

作为Comp-AC家庭的一员，ACS140丰富了ABB传动产品的内容。尽管其尺寸不大，却包含了许多高性能传动产品所拥有的功能。它非常适合气体，液体，固体的处理工艺，典型的应用场合

包括:包装机、饼干机、洗衣机、搅拌机、传送带和泵类等。

ACS140具有本文的可靠性设计。可选无散热器型，结构更加轻巧，OEM商可自由设计散热方式。如果采用法兰式安装，模块产生的热量将直接耗散于柜体之外。为进一步增强传动设备的可靠性，模块的部件数量已尽可能地减到少。

ACS140的输出频率灵敏地跟随给定信号的变化。平均精度好于1%，响应速度快，平均延迟时间小于9毫米。

产品质量恒久如一为确保生产质量，可重复性是ACS140成败的关键因素之一。

ACS140在系统响应和控制精度上表现得非常稳定。与泵类和搅拌机有关的连续性生产，要求装配相当可靠的传动设备。ACS140足十分令人放心的。在相当苛刻的工业环境中，ABB可以提供特殊的IP54封装。

在材料加工和包装线上，定位是控制的基本要求。ACS140的可重复性具有明显的技术优势。改变产品规格时，只需要调用预先设定的七种速度中的一种，就可轻而易举地解决问题。

ACS140的动态制动和跟踪起动功能，用于建筑物的温度或湿度控制是非常实用的。内置的PID功能确保温度、湿度、压力等保持恒定。
Product description:



Used for speed and torque control of 0.12-2.2KW squirrel cage motor



As a member of Comp-AC family, ACS140 enriches the content of ABB transmission products. Although its size is small, it contains the functions of many high-performance transmission products. It is very suitable for the treatment process of gas, liquid and solid, and typical applications



Including: packaging machine, biscuit machine, washing machine, mixer, conveyor belt and pump, etc.



ACS140 has the reliability design in this paper. The radiator free type can be selected, which makes the structure more lightweight. The OEM can freely design the heat dissipation mode. If flange type installation is adopted, the heat generated by the module will be directly dissipated outside the cabinet. In order to further enhance the reliability of the transmission equipment, the number of components of the module has been reduced to the minimum.



The output frequency of ACS140 sensitively follows the change of the given signal. The average accuracy is better than 1%, the response speed is fast, and the average delay time is less than 9 mm.



Product quality is consistent. To ensure production quality, repeatability is one of the key factors for the success of ACS140.



ACS140 is very stable in system response and control accuracy. For continuous production related to pumps and mixers, it is required to equip fairly reliable transmission equipment. ACS140 is very reassuring. In a very demanding industrial environment, ABB can provide special IP54 packages.



In the material processing and packaging line, accurate positioning is the basic requirement for control. The repeatability of ACS140 has obvious technical advantages. When changing the product specification, it is easy to solve the problem by calling one of the seven preset speeds.



The dynamic braking and tracking starting function of ACS140 is very practical for temperature or humidity control of buildings. The built-in PID function ensures constant temperature, humidity, pressure, etc.
S800 I/O是一个综合、分布式和模块化的过程I/O系统，通过工业标准现场总线与父控制器和PLC通信。TB840 ModuleBus Modem是光纤模块总线的光纤接口。TB840A用于冗余配置，其中每个模块连接到不同的光模块总线线路，但连接到相同的电模块总线。



ModuleBus Modem具有逻辑上相同的电气和光学ModuleBus接口。多12个I/O模块可以连接到电气模块总线，多7个集群可以连接到光纤模块总线。光纤接口用于I/O集群的本地分布，并且I/O站中需要12个以上的I/O模块。



功能和优点

2个光纤端口至光纤模块总线

模块总线（电气）至I/O模块

I/O模块总线和电源的监控功能

I/O模块的隔离电源

TU840，MTU用于冗余TB840/TB840A，双模块总线

TU841，MTU用于冗余TB840/TB840A，单模块总线

输入电源保险丝
S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers and PLCs over industry-standard field buses. The TB840 ModuleBus Modem is a fiber optic interface to the Optical ModuleBus. TB840A is used in redundancy configurations where each module is connected to different optical ModuleBus lines, but connected to the same electrical ModuleBus.

The ModuleBus Modem has an electrical and an optical Modulebus interface which are logically the same bus. A maximum of 12 I/O modules can be connected to the electrical ModuleBus and up to seven clusters can be connected to the fiber optic ModuleBus. The fiber optic interface is intended for local distribution of I/O clusters and where more than 12 I/O modules are required in an I/O station.

Features and benefits
2 fiber optic ports to optical ModuleBus
ModuleBus (electrical) to the I/O Modules
Supervisory functions of I/O ModuleBus and power supply
Isolated power supply to I/O modules
TU840, MTU for redundant TB840/TB840A, dual ModuleBus
TU841, MTU for redundant TB840/TB840A, single ModuleBus
Input power fused
The Hydran M2 is a compact permanently mounted on-line transformer monitoring device that will alert personnel to developing fault conditions. It continuously monitors a composite value of various fault gases (in ppm) or a Hydrogen gas only value (depending on sensor purchased). In addition it tracks moisture in oil (reading in %RH and ppm).

With additional sensors added, the Hydran M2 can also compute transformer mathematical models based on IEEE® and IEC® standards to provide further information on the performance of the transformer.Hydran M2是一种紧凑的久安装在线变压器监测装置，可提醒人员出现故障情况。它连续监测各种故障气体的合成值（ppm）或仅氢气值（取决于购买的传感器）。此外，它还跟踪油中的水分（读数为%RH和ppm）。



添加了额外的传感器后，Hydran M2还可以根据IEEE®和IEC®标准计算变压器数学模型，以提供关于变压器性能的进一步信息。Real-time Hydrogen or composite fault gas monitoring system
Moisture in oil measurement
Ability to integrate additional sensors (load, oil temperature, …)
Option to process transformer mathematical models based on IEC/IEEE standardsEasy to install on a single valve.
No moving parts, no pumps and no extra piping required.
No field calibration required.
Local and remote alarms set at pre defined levels.Hydrogen sensor responds 100% to Hydrogen (general fault gas)
Composite gas sensor responds 100% to Hydrogen and is also sensitive to Carbon Dioxide (overheated paper insulation).
Choice of up to 4x input or output cards
Wide range of communication methods and protocols.
RS485 output is standard. TCP/IP copper or fibre is optional
     
Vacuum-resistant gas extraction membrane.
Built in temperature condition system.
Full system self test and self-diagnostics.
Logging of data and significant events up to a year.
User-friendly client/server graphical user interface software.
Applications

Medium to large sized transformers.
Lower risk and/or consequence of failure.
     
Transmission transformers.
Significant step up from manual oil sampling.实时氢气或复合故障气体监测系统

油中水分测量

能够集成附加传感器（负载、油温等）

基于IEC/IEEE标准处理变压器数学模型的选项易于安装在单个阀门上。

无需移动部件、泵和额外管道。

无需现场校准。

本地和远程警报设置在预先定义的水平。氢气传感器100%响应氢气（一般故障气体）

复合气体传感器对氢气100%响应，对二氧化碳（纸绝缘过热）也敏感。

多可选择4个输入或输出卡

广泛的通信方法和协议。

RS485输出为标准输出。TCP/IP铜缆或光纤是可选的



耐真空气体抽取膜。

内置温度调节系统。

全系统自检和自诊断。

记录长达一年的数据和重大事件。

用户友好的客户端/服务器图形用户界面软件。

应用



中大型变压器。

降低故障风险和/或后果。



输电变压器。

手动油取样的显著提高。水流量分析仪CLS204温度控制器204-C10000BY
Watlow Anafaze CLS200操控器204-C10000BY
Watlow Anafaze CLS200操控器的特色:PID control of up to 16 heating and cooling circuits reduces the panel space of each circuit, reduces installation time, and improves reliability: fewer parts mean fewer problems

Automatic tuning requires less tuning time and achieves excellent handling with less expertise

Menu guided operation with full text display allows quick setting of the controller and simplified operation

Eight jobs are stored and called to quickly switch from one process to another

Multi input and mixed input, accept the combination of thermocouple, resistance temperature sensor, linear DC voltage and linear DC current sensor, and reduce the learning curve and inventory

Sensor fault detection shortens the time for fault diagnosis of reverse, short circuit and open circuit sensors, high/low processes and deviation alarms for each input, and integrates with PLC and other control elements as required

34 channel digital output, providing flexible equipment, and allowing the use of output according to control and alarm needs

EIA/TIA-232 and 485 communication, connecting to software for easy equipment and operation, and allowing integration with controller and software

The PMC-5565PIORC reflective memory node card provides a high-speed, low latency, deterministic interface that allows data sharing between up to 256 independent systems (nodes) at a rate of up to 170 Mbyte/s. Each reflective memory board can be configured with 128 MB or 256 MB on-board SDRAM. Local SDRAM provides fast read access time to stored data. Writes are stored in the local SDRAM and broadcast to other reflective memory nodes through high-speed optical fiber data paths. Data transmission between nodes is software transparent, so there is no I/O overhead. Transmit and receive FIFO buffered data during peak data rates to optimize host and bus performance to maintain high data throughput. PMC-5565PIORC conforms to RoHS standard, and has improved PIO reading performance and firmware that can be upgraded in the field.