自营IC695PSD040模块GE

易卖工控网（www.ymgk.com）提供”IC695PSD040模块GE”，产品详情：品牌/厂家：GE、型号：IC695PSD040、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

IC695PSD040中刚性地固定有两个线圈组件，磁钢用弹簧悬挂于壳体。当传感器在工作频率范围内工作时，线圈与磁钢产生相对运动，线圈切割磁力线，产生感应电动势（感应电压），该电压正比于机壳的振动速度。温度传感器的温度测量是利用铂电阻随温度线性变化的性质来测温的。
多达16个加热和冷却回路的PID操控小化了每个回路的面板空间，减少了安装时间，并提了可靠性:更少的零件意味着更少的毛病
自动调谐需求更少的调谐时间，并以更少的专业知识实现出色的操控
带有全文显现的菜单引导操作答应快速设置操控器并简化操作|

八个作业被存储和调用，从一个进程快速转换到另一个进程
多输入和混合输入，接受热电偶、电阻温度传感器、线性直流电压和线性直流电流传感器的组合，并减少学习曲线和库存
传感器毛病检测缩短了对反向、短路和开路传感器、/低进程和每个输入的偏差警报进行毛病诊断的时间，并根据需求与PLC和其他操控元件集成
34路数字输出，供给灵活的装备，并答应根据操控和报警需求使用输出
EIA/TIA-232和485通信，连接到软件以便于装备和操作，并答应与操控器和软件集成
PMC-5565PIORC 反射式内存节点卡提供速、低延迟、确定性接口，允许在达 170 Mbyte/s 的速率下在多达 256 个独立系统（节点）之间共享数据。每个反射内存板都可以配置 128 MB 或 256 MB 的板载 SDRAM。本地 SDRAM 提供对存储数据的快速读取访问时间。写入存储在本地 SDRAM 中，并通过速光纤数据路径广播到其他反射存储器节点。节点之间的数据传输是软件透明的，因此不需要 I/O 开销。在峰值数据速率期间发送和接收 FIFO 缓冲数据，以优化主机和总线性能以保持数据吞吐量。PMC-5565PIORC 符合 RoHS 标准，并具有改进的 PIO 读取性能和可在现场升级的固件。

动态数据包大小，4 到 64 字节数据
多模光纤长300m，单模光纤长10km
多达 256 个节点
写入一个节点内存的数据也会写入网络上所有节点的内存
速、易于使用的光纤网络（串行 2.12 Gbaud）
传输速率 43 Mbyte/s（4 字节数据包）至 170 Mbyte/s（64 字节数据包）128 MB 或 256 MB SDRAM 反射内存
一个独立的DMA通道
网络上的任何节点都可以使用单个命令在网络上的任何其他节点或所有网络节点中生成中断
错误检测

用于额外错误抑制的冗余传输模式
无处理器开销
没有处理器参与网络的运行
必须与 PMC/PMI 载体 (Abaco P/N 2BARCCBD1) 结合使用，以替代 PCI-5565PIORC
 PCI Reflective Memory with PIO read performance
As a longstanding leader in Reflective Memory (RFM) technology, J-Squared understands the demands of real-time networks. We know that certain types of applications require the determinism, implementation simplicity, and lack of software overhead that ubiquitous technologies such as Ethernet can’t deliver.

Our PCI-5565PIORC Reflective Memory node card in PCI form factor is engineered specifically to provide highly deterministic, tightly timed performance for a variety of advanced networking applications that need to deterministically move large amounts of data fast and share that data in real time among similar or disparate network nodes.

J-Squared’s RFM products are designed to fit into your existing hardware and operating system environment, integrating diverse hardware platforms running different operating systems into a single, shared memory network.

The PCI-5565PIORC is well-suited for industrial control applications in which implementation simplicity, a lack of software overhead, and bus structure and operating system independence are key factors, such as:
Aircraft simulators
Automated testing systems
Ship and submarine simulators
Aluminum rolling mill
Power plant simulators
Engine test stands
Industrial process control
High-speed data acquisition
PLCs
Features
High speed, easy to use fiber-optic network (2.12 Gbaud serially)
Data written to memory in one node is also written to memory in all nodes on the network
Up to 256 nodes
Connection with multimode fiber up to 300 m, single mode fiber up to 10 km
Dynamic packet size, 4 to 64 bytes of data
Transfer rate 43 MB/s (4 byte packets) to 174 MB/s (64 byte packets)
64 MB or 128 MB SDRAM Reflective Memory
Two independent DMA channels
Any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command
Error detection
Redundant transfer mode for extra error suppression
No processor overhead
No processor involvement in the operation of the network
PCI 64-bit 66 MHz transfers, 3.3 or 5V, single width mezzanine interface
Please call for Windows Drivers (available Windows 7/XP/Vista/Server 2008/Server 2003, 32/64-bit for PCIE/PCI/PMC)具有PIO读取性能的PCI反射存储器

作为反射存储器（RFM）技术的长期导者，J-Squared了解实时网络的需求。我们知道，某些类型的应用程序需要确定性、实现的简单性和软件开销的缺乏，这是以太网等普遍存在的技术无法提供的。



我们的PCI规格的PCI-5565PIORC反射式存储节点卡专门设计用于为各种级网络应用程序提供确定性、时间紧的性能，这些应用程序需要快速确定地移动大量数据，并在相似或不同的网络节点之间实时共享这些数据。



J-Squared的RFM产品旨在适应您现有的硬件和操作系统环境，将运行不同操作系统的各种硬件平台集成到一个单一的共享内存网络中。



PCI-5565PIORC非常适合于工业控制应用，在这些应用中，实现简单、缺乏软件开销、总线结构和操作系统独立性是关键因素，例如：

飞机模拟器

自动化测试系统

船舶和潜艇模拟器

铝材轧机

电厂模拟器

发动机试验台

工业过程控制

速数据采集

可编程逻辑控制器

特征

速、易于使用的光纤网络（2.12 Gbaud串行）

写入一个节点内存的数据也写入网络上所有节点的内存

多256个节点

与多模光纤的连接长300米，单模光纤长10公里

动态数据包大小，4至64字节数据

传输速率43 MB/s（4字节数据包）到174 MB/s（64字节数据包

64 MB或128 MB SDRAM反射内存

两个独立的DMA信道

网络上的任何节点都可以通过一个命令在网络上的其他任何节点或所有网络节点中生成中断

错误检测

用于额外错误抑制的冗余传输模式

无处理器开销

处理器不参与网络操作

PCI 64位66 MHz传输，3.3或5V，单宽度夹层接口

请调用Windows驱动程序（适用于Windows 7/XP/Vista/Server 2008/Server 2003，适用于PCIE/PCI/PMC的32/64位）经济性与可用的建设时间系统

系统设计人员越来越需要在更短时间内构造出更强大、更复杂的系统。在这种情况下，硬件成本与软件和集成硬件/软件的成本相比微不足道，这点在单机系统与微系统中表现得更加明显。在时间与系统正常运行的低单位投资成为市场上的关键因素时，使用反射内存便会带来极大的利益。在这些要求苛刻的系统中，反射内存简单的读/写通信方式大大提了产品上市时间，同时提了网络上的数据通过量。反射内存价格PCI5565 PCI-5565  PMC5565 VMIC5565 反射内存 反射内存卡 GE反射内存 

  
GE反射内存代理 GE PCI5565 GE反射内存卡
PCI5565系列反射内存卡，PCI-5565PIORC光纤反射内存订购信息
PCI-5565PIORC-110000 128MB反射内存卡 PCI接口PCI-5565
PCI-5565PIORC-111000 单模光纤 PCI-5565PIORC
PCI-5565PIORC-210000 256MB反射内存卡  多模光纤 256M反射内存卡
PCI-5565PIORC-211000 256MB反射内存卡  单模光纤 PCI-5565PIO

PMC5565接口反射内存卡，光纤反射内存，超速反射内存订购信息
PMC-5565PIORC-110000 128MB反射内存卡 多模光纤接口PMC5565
PMC-5565PIORC-111000 单模光纤反射内存PMC5565
PMC-5565PIORC-210000 256MB反射内存卡   多模光纤反射内存PMC-5565
PMC-5565PIORC-211000    单模光纤PMC5565PIORC

PCIE接口反射内存，PCIE5565  PCIE-5565 PCI-5565RC-110000
PCIE-5565PIORC-100A00
PCIE-5565PIORC-200A00

PCIE-5565RC-100000 PCIE5565反射内存卡
PCIE-5565RC-200000 PCIE-5565 128M反射内存

反射内存交换机ACC-5595 反射内存HUB
HUB-5595 GE反射内存交换机，GE反射内存集线器，反射内存交换机

反射内存报价PCI5565 PCI-5565  PMC5565 VMIC5565 反射内存 反射内存卡 GE反射内存 ACC-5595,VMIACC-5595,GE交换机，GE集线器，反射内存报价 GE代理 反射内存代理
GE反射内存代理 GE PCI5565 GE反射内存卡
PCI5565系列反射内存卡，PCI-5565PIORC光纤反射内存订购信息
PCI-5565PIORC-110000 128MB反射内存卡 PCI接口PCI-5565
PCI-5565PIORC-111000 单模光纤 PCI-5565PIORC
PCI-5565PIORC-210000 256MB反射内存卡  多模光纤 256M反射内存卡
PCI-5565PIORC-211000 256MB反射内存卡  单模光纤 PCI-5565PIO

PMC5565接口反射内存卡，光纤反射内存，超速反射内存订购信息
PMC-5565PIORC-110000 128MB反射内存卡 多模光纤接口PMC5565
PMC-5565PIORC-111000 单模光纤反射内存PMC5565
PMC-5565PIORC-210000 256MB反射内存卡   多模光纤反射内存PMC-5565
PMC-5565PIORC-211000    单模光纤PMC5565PIORC
KUC720AE01 3BHB003431R0001 3BHB000652R0001 配有大LCD的便携式专业丈量仪器，可显现三行读数，背光显现确保读取便利。采用 "单手操作"的量程开关规划，丈量简单便利。供给过载保护和低电量指示。这是一款理想的多功用仪器，在工厂、校园、业余和家用域的实践应用中都有不俗表现。

此仪表采用光学和声响报警，以避免误衔接测验引线，并对误操作造成的损坏供给额外的防护。5合1数字多功用测验仪的规划结合了声级、亮度、湿度和温度计以及数字万用表的功用。

KUC720AE01能够丈量沟通/直流电压和电流、电阻、频率、负载、电容并进行连通性和二极管测验。 读数和丈量单位都显现在LCD上，包括自动调量程和手动操作。可自动调量程和手动调量程。HHM8229具有自动断电功用、读数保持功用和相对丈量功用。

标准:
PCIE接口反射内存，PCIE5565  PCIE-5565 PCI-5565RC-110000
PCIE-5565PIORC-100A00
PCIE-5565PIORC-200A00
PID control of up to 16 heating and cooling circuits reduces the panel space of each circuit, reduces installation time, and improves reliability: fewer parts mean fewer problems

Automatic tuning requires less tuning time and achieves excellent handling with less expertise

Menu guided operation with full text display allows quick setting of the controller and simplified operation

Eight jobs are stored and called to quickly switch from one process to another

Multi input and mixed input, accept the combination of thermocouple, resistance temperature sensor, linear DC voltage and linear DC current sensor, and reduce the learning curve and inventory

Sensor fault detection shortens the time for fault diagnosis of reverse, short circuit and open circuit sensors, high/low processes and deviation alarms for each input, and integrates with PLC and other control elements as required

34 channel digital output, providing flexible equipment, and allowing the use of output according to control and alarm needs

EIA/TIA-232 and 485 communication, connecting to software for easy equipment and operation, and allowing integration with controller and software

The PMC-5565PIORC reflective memory node card provides a high-speed, low latency, deterministic interface that allows data sharing between up to 256 independent systems (nodes) at a rate of up to 170 Mbyte/s. Each reflective memory board can be configured with 128 MB or 256 MB on-board SDRAM. Local SDRAM provides fast read access time to stored data. Writes are stored in the local SDRAM and broadcast to other reflective memory nodes through high-speed optical fiber data paths. Data transmission between nodes is software transparent, so there is no I/O overhead. Transmit and receive FIFO buffered data during peak data rates to optimize host and bus performance to maintain high data throughput. PMC-5565PIORC conforms to RoHS standard, and has improved PIO reading performance and firmware that can be upgraded in the field.



Dynamic packet size, 4 to 64 bytes of data

The maximum length of multimode optical fiber is 300m, and the maximum length of single-mode optical fiber is 10km

Up to 256 nodes

Data written to the memory of one node will also be written to the memory of all nodes on the network

High speed, easy-to-use optical network (serial 2.12 Gbaud)

Transmission rate 43 Mbyte/s (4-byte packets) to 170 Mbyte/s (64 byte packets) 128 MB or 256 MB SDRAM reflection memory

An independent DMA channel

Any node on the network can use a single command to generate an interrupt in any other node or all network nodes on the network

Error detection

Redundant transmission mode for additional error suppression

No processor overhead

No processor participates in network operation

Must be used in combination with PMC/PMI carrier (Abaco P/N 2BARCBD1) to replace PCI-5565PIORC

PCI Reflective Memory with PIO read performance

As a longstanding leader in Reflective Memory (RFM) technology, J-Squared understands the demands of real-time networks. We know that certain types of applications require the determinism, implementation simplicity, and lack of software overhead that ubiquitous technologies such as Ethernet can’t deliver.



Our PCI-5565PIORC Reflective Memory node card in PCI form factor is engineered specifically to provide highly deterministic, tightly timed performance for a variety of advanced networking applications that need to deterministically move large amounts of data fast and share that data in real time among similar or disparate network nodes.



J-Squared’s RFM products are designed to fit into your existing hardware and operating system environment, integrating diverse hardware platforms running different operating systems into a single, shared memory network.



The PCI-5565PIORC is well-suited for industrial control applications in which implementation simplicity, a lack of software overhead, and bus structure and operating system independence are key factors, such as:

Aircraft simulators

Automated testing systems

Ship and submarine simulators

Aluminum rolling mill

Power plant simulators

Engine test stands

Industrial process control

High-speed data acquisition

PLCs

Features

High speed, easy to use fiber-optic network (2.12 Gbaud serially)

Data written to memory in one node is also written to memory in all nodes on the network

Up to 256 nodes

Connection with multimode fiber up to 300 m, single mode fiber up to 10 km

Dynamic packet size, 4 to 64 bytes of data

Transfer rate 43 MB/s (4 byte packets) to 174 MB/s (64 byte packets)

64 MB or 128 MB SDRAM Reflective Memory

Two independent DMA channels

Any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command

Error detection

Redundant transfer mode for extra error suppression

No processor overhead

No processor involvement in the operation of the network

PCI 64-bit 66 MHz transfers, 3.3 or 5V, single width mezzanine interface

Please call for Windows Drivers (available Windows 7/XP/Vista/Server 2008/Server 2003, 32/64 bit for PCIE/PCI/PMC) PCI reflective memory with PIO reading performance



As a long-term leader in reflective memory (RFM) technology, J-Squared understands the needs of real-time networks. We know that certain types of applications require certainty, simplicity of implementation, and lack of software overhead, which are not provided by ubiquitous technologies such as Ethernet.





Our PCI PCI-5565PIORC reflective storage node card is specially designed to provide highly deterministic, time tight performance for various advanced network applications that need to move large amounts of data quickly and definitively, and share the data in real time between similar or different network nodes.





The RFM product of J-Squared is designed to adapt to your existing hardware and operating system environment, integrating various hardware platforms running different operating systems into a single shared memory network.





PCI-5565PIORC is very suitable for industrial control applications. In these applications, simple implementation, lack of software overhead, bus structure and operating system independence are key factors, such as:



Aircraft simulator



Automated test system



Ship and submarine simulator



Aluminium rolling mill



Power plant simulator



Engine test bench



industrial process control



High speed data acquisition



PLC



features



High speed, easy-to-use optical network (2.12 Gbaud serial)



Data written to the memory of one node is also written to the memory of all nodes on the network



Up to 256 nodes



The connection with multimode optical fiber is up to 300m, and the connection with single-mode optical fiber is up to 10km



Dynamic packet size, 4 to 64 bytes of data



Transmission rates 43 MB/s (4-byte packets) to 174 MB/s (64 byte packets



64 MB or 128 MB SDRAM reflective memory



Two independent DMA channels



Any node on the network can generate an interrupt in any other node or all network nodes on the network through a command



Error detection



Redundant transmission mode for additional error suppression



No processor overhead



Processor does not participate in network operation



PCI 64 bit 66 MHz transmission, 3.3 or 5V, single width mezzanine interface



Please call the Windows driver (for Windows 7/XP/Vista/Server 2008/Server 2003, for PCIE/PCI/PMC 32/64 bit), the economical and available construction time system



System designers need to build more powerful and complex systems in a shorter time. In this case, the cost of hardware is insignificant compared with the cost of software and integrated hardware/software, which is more obvious in stand-alone systems and microsystems. When time and low unit investment for normal system operation become key factors in the market, using reflective memory will bring great benefits. In these demanding systems, the simple read/write communication mode of reflective memory greatly improves the time to market of the product and the data throughput on the network. Reflected memory price PCI5565 PCI-5565 PMC5565 VMIC5565 Reflected memory Reflected memory card GE Reflected memory




GE reflective memory agent GE PCI5565 GE reflective memory card

PCI5565 series reflective memory card, PCI-5565PIORC optical fiber reflective memory ordering information

PCI-5565PIORC-110000 128MB reflective memory card PCI interface PCI-5565

PCI-5565PIORC-111000 Single mode optical fiber PCI-5565PIORC

PCI-5565PIORC-210000 256MB reflective memory card Multimode fiber 256M reflective memory card

PCI-5565PIORC-211000 256MB reflective memory card single-mode optical fiber PCI-5565PIO



PMC5565 interface reflective memory card, optical fiber reflective memory, ultra-high speed reflective memory ordering information

PMC-5565PIORC-110000 128MB reflective memory card multi-mode optical fiber interface PMC5565

PMC-5565PIORC-111000 Single mode optical fiber reflective memory PMC5565

PMC-5565PIORC-210,000 256MB reflective memory card multi-mode optical fiber reflective memory PMC-5565

PMC-5565PIORC-211000 single-mode optical fiber PMC5565PIORC



PCIE interface reflection memory, PCIE5565 PCIE-5565 PCI-5565RC-110000

PCIE-5565PIORC-100A00

PCIE-5565PIORC-200A00



PCIE-5565RC-100000 PCIE5565 reflective memory card

PCIE-5565RC-200000 PCIE-5565 128M reflective memory



Reflective memory switch ACC-5595 Reflective memory HUB

HUB-5595 GE reflective memory switch, GE reflective memory hub, reflective memory switch



Reflective memory