自营MKD041B-144-GP0-KN具有驱动作用

易卖工控网（www.ymgk.com）提供”MKD041B-144-GP0-KN具有驱动作用”，产品详情：品牌/厂家：REXROTH、型号：MKD041B-144-GP0-KN、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

美国国家仪器 SCXI-1349需要使用几件物品：一台计算机、一个 68 针 E 系列 DAQ 设备、一个 SCXI-1000、SCXI-1001 或 SCXI-1000DC 机箱、至少一个 SCXI 模块（不是 SCXI 开关模块）、一个小型一字螺丝刀、安装指南和NI SCXI-1349屏蔽电缆组件，它由电缆适配器和 68 针屏蔽电缆组成。SCXI -1349可与 1 m 或 2 m SH68-68-EP 屏蔽电缆一起使用，将 E 系列设备连接到 SCXI 机箱。其他选项是使用 0.5 m 或 1 m SHC68-68-EP 电缆或 1 m PSHR68-68 电缆将 DAQCard 连接到 SCXI 机箱。SCXI -1349 的大工作电压为 30 Vrms、42 Vpk 或 60 VDC（信号 + 共模）。

用户必须确保每个信号连接都绝缘到NI SCXI 1349可能遇到的大电压。超过National Instruments SCXI-1349 电缆适配器大信号额定值的接地电源信号和其他连接可能会导致电击或火灾危险。这也会对连接到 SCXI 机箱、计算机或 SCX 设备的电路板造成损害。
The US National Instrument SCXI-1349 requires several items: a computer, a 68-pin E-series DAQ device, an SCXI-1000, SCXI-1001, or SCXI-1000DC chassis, at least one SCXI module (not an SCXI switch module), a small slotted screwdriver, installation instructions, and NI SCXI-1349 shielded cable assembly, which consists of a cable adapter and a 68-pin shielded cable. The SCXI 1349 can be used with 1 m or 2 m SH68-68-EP shielded cables to connect E series devices to the SCXI chassis. The other option is to connect the DAQCard to the SCXI chassis using a 0.5 m or 1 m SHC68-68-EP cable or a 1 m PSHR68-68 cable. The maximum operating voltage of the SCXI 1349 is 30 Vrms, 42 Vpk, or 60 VDC (signal+common mode).



The user must ensure that each signal connection is insulated to the maximum voltage that the NI SCXI 1349 may encounter. Grounding power signals and other connections that exceed the maximum signal rating of the National Instruments SCXI-1349 cable adapter can cause a risk of electric shock or fire. This can also cause damage to circuit boards connected to an SCXI chassis, computer, or SCX device.