自营MKD112C-024-KG3-BN伺服电机的应用

易卖工控网（www.ymgk.com）提供”MKD112C-024-KG3-BN伺服电机的应用”，产品详情：品牌/厂家：REXROTH、型号：MKD112C-024-KG3-BN、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

开关的更换当ESWA或ESWB用于更换非托管交换机时，将使用现有的安装支架（可以是面板或DIN导轨安装）。在当前的开关上，有七个螺丝孔用于面板安装。Switch Replacement When an ESWA or ESWB is used to replace an unmanaged switch, an existing mounting bracket (which can be a panel or DIN rail mount) will be used. On the current switch, there are seven screw holes for panel mounting.



IS420ESWBH3A function



Dimensions (W x D x H)



138 x 86 x 56 mm



Cooling Convective cooling when installed vertically or horizontally



Absolute Maximum Current WOC has the largest inventory of Speedtronic Mark VIe, and we can repair your faulty spare parts during the warranty period. Our expert team is available 24 hours a day to support your urgent needs related to critical spare parts. Please contact us.



common problem



What is IS420ESWBH3A?



IS420ESWBH3A is an Ethernet IONet switch that is part of the GE Speedtronic Mark VIe gas turbine control system.





What is the size of the component?



138 mm wide, 86 mm deep, 56 mm high





What LED indicators are there on the switch?



The LEDs indicating link status, activity, duplex, and speed ports (each LED has two colors) and the power status indicator light The pressure sensor is composed of three parts: a pressure interface, a pressure sensitive element, and a signal output. The pressure interface is a metal component. The pressure sensitive element is mainly composed of five parts: a pressure sensitive bridge, a sintered tube shell, filled ceramic, a metal membrane, and a welding ring, The signal output section consists of an outgoing signal output line and a PCB circuit board. The gauge pressure sensor is mainly composed of three parts: pressure sensitive device (core), conversion element (signal processing circuit), pressure interface and packaging (mechanical structure and connectors). Pressure sensitive devices are the core functional components of sensors, consisting of silicon based force sensitive chips, metal isolation membranes, protective liquids, and metal components.



The conversion element (signal processing circuit) consists of a compensation circuit, an amplification circuit, a filter circuit, etc. The silicon based force sensitive chip converts the measured pressure signal into a voltage signal (mV level), which is then compensated and amplified to adjust the sensor output to a specified standard specification signal of 0.5 to 5 V.IS420ESWBH3A功能

尺寸（宽x深x高）

138 x 86 x 56毫米

冷却垂直或水平安装时对流冷却

对大电流WOC拥有Speedtronic Mark VIe的大库存，我们可以在保修期内维修您的故障备件。我们的专家团队24小时待命，以支持您与关键备件相关的紧急需求，请联系我们。

常见问题

什么是IS420ESWBH3A？

IS420ESWBH3A是以太网IONet交换机，是GE Speedtronic Mark VIe燃气轮机控制系统的一部分。



部件的尺寸是多少？

138 mm宽，86 mm深，56 mm高



开关上有哪些LED指示灯？

指示链路状态、活动、双工和速度端口的LED（每个LED有两种颜色）和电源状态指示灯压力传感器是由压力接口、压力敏感元件以及信号输出三部分组成，压力接口为金属部件，压力敏感元件主要由压力敏感电桥、烧结管壳、填充陶瓷、金属膜片、焊环五部分组成，信号输出部分由引出信号输出线和PCB电路板组成。表压压力传感器主要由压力敏感器件（芯体）、转换元件（信号处理电路）、压力接口及封装（机械结构及接插件）3 部分组成。压力敏感器件是传感器的核心功能元件，由硅基力敏敏感芯片、金属隔离膜片、保护液体，金属部件等组成。

转换元件（信号处理电路）包括补偿电路、放大电路、滤波电路等组成。硅基力敏敏感芯片把测量压力信号转换成电压信号（mV 级），再经过补偿和放大，使传感器输出调整到规定的标准规范信号0.5 ～ 5 V。