KONGSBERG运动参考装置配置GLB-7B/7A-SPAREB

易卖工控网（www.ymgk.com）提供”KONGSBERG运动参考装置配置GLB-7B/7A-SPAREB”，产品详情：品牌/厂家：Kongsberg、型号：GLB-7B/7A-SPAREB、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

m PLC是一款功能强大的大型模块化控制器，其总内存大小为256K至2M，用户逻辑大小为8K至 2.9M(7M w/PCMCIA卡)，寄存器大小为10K至128K，扩展寄存器为96K(7M w/PCMCIA卡。 Quantum PLC产品线支持热备用、本地、远程和分布式I/O配置，包括双电缆和多个网络选项。  140CPU4342U Quantum Unity本机处理器800 KB。与现有Quantum处理器140CPU4342A相同的CPU，此U CPU为Unity原生。Unity操作系统已下载，该CPU已准备好与Unity Pro软件一起使用。  140CPU31110 Unity Quantum处理器，带400 Kb处理器 140CPU65150 Unity Quantum处理器，512 Kb内存，用于程序和未分配数据，可通过PCMCIA扩展至7 MB;和以太网 140CPU65160 Unity Quantum处理器，768 Kb内存，用于程序和未分配数据，可通过PCMCIA扩展至7 MB;和以太网  140CPU67160 Unity Quantum热备用处理器，带 768/7168K。Unity Quantum热备用处理器，带热备用光纤通信端口 490NOR00003光缆3m。 MTRJ/MTRJ电缆，用于通过光纤端口将两个热备用 Unity处理器连接在一起。 490NOR00015光缆 15m。MTRJ/MTRJ电缆，用于通过光纤端口将两个热备用Unity处理器连接在一起 140CPU65160S基于140CPU65160的独立CPU 基于140CPU67160的 140CPU67160S热备用CPU 140CPU11302量子控制器、256k RAM、8K用户逻辑、10K寄存器、1个 ModBus和1个ModBusPlus端口， 140CPU11303量子控制器、512k RAM、16k用户逻辑、10K寄存器、 1个ModBus和1个ModBusPlus端口 140CPU4342A 量子控制器，486，2M SRAM，2个ModBus端口，1个 ModBus Plus。钥匙开关至启动/内存保护/启动控制器 140CPU53414B量子控制器，2.5 MRAM，2 个ModBus端口，1个ModBus Plus。数学协处理器。启动/内存保护/启动控制器按键开关 Modicon PLC施耐德PLC Telemecanique PLC The IC697PWR748 is a 90W 48 VDC Power Supply Module by GE Fanuc for the 90-70 Series. It has three output voltages (+5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp) totaling 90 watts. The module features slide-in rack mount construction and two rack operation from a single power supply. This power supply is equipped with electronic short circuit overcurrent protection provided on a 5 volt bus. This particular unit plugs into a 48-pin backplane-mounted connector (see leftmost slot in the rack). It delivers +5 volt, +12 volt, and -12 volt power. Logic level sequencing signals to the backplane. The IC697PWR748 power supply module can be used in a single rack application or, if the user prefers, it can provide power to a second rack. If the latter is chosen, it is important that the total load is within the supply rating. Interconnection to the second rack is by way of a prewired cable (IC697CBL700). The power supply output will ride through a 10 ms total loss of input power at full load. Protection is delivered for overcurrent and overvoltage fault conditions. The power supply comes standard with an electronic overvoltage protection circuit which will clamp the output if the 5 V bus exceeds 6.7 volts. External overvoltage on the output will not cause the power supply fuse to open, but if an internal fault in the power supply caused the overvoltage condition, it is possible for the fuse to open. If the fuse needs replacement, a 5 amp, 250 volt 5x20 mm fuse should be used. IC697PWR748是GE Fanuc为 90-70系列提供的90W 48 VDC电源模块。它有三个输出电压(+5 VDC输出，高18安培，+12 VDC输出，大1.5安培，-12 VDC输出，多1安培)，总计 90瓦。该模块具有滑入式机架安装结构和单电源双机架操作。该电源配备了5伏总线上提供的电子短路过电流保护。 此特定单元插入48针背板安装连接器(请参阅机架中左侧的插槽)。它提供+5伏、+12伏和-12伏电源。至背板的逻辑电平排序信号。IC697PWR748电源模块可用于单个机架应用，或者，如果用户愿意，它可以向第二个机架供电。如果选择后者，则总负载必须在额定供电范围内。 通过预布线电缆(IC697CBL700)与第二个机架互连。满载时，电源输出将经历10 ms的输入功率总损失。为过电流和过电压故障条件提供保护。电源标配有一个电子过电压保护电路，如果5V总线超过 6.7伏，该电路将箝位输出。输出上的外部过电压不会导致电源保险丝断开，但如果电源中的内部故障导致过电压情况，则保险丝可能断开。如果需要更换保险丝，应使用5安培250伏5x20毫米保险丝。 roduct Description The GE Fanuc’s IC698RMX016 is a 16MB Redundant Memory Xchange for the Rx7I Pacsystem. It has the following sizing: 6.299 inches widde x 9.187 inches high. It has 16MB of SDRAM user memory. The operating voltage from power supply is +5 V DC. Current requirements are 1.8A. The unit has a fiber optic LC type connector which, conforms to IEC 61754-20, and a zirconium ceramic ferrule. The maximum insertion loss is 0.35 dB with a return loss of -30dB. An acceptable temperature range is between -20°C and +85°C. To complete installation, you need to make sure you have all of the following: A PACSystems RX7i CPU with release 2.00 or later firmware; a PACSystems Rx7i CPU rack with power supply; a PC-compatible computer with CIMPLICITY Machine Edition – Logic Developer PLC, version 4.5 or later programming software and the necessary cables.